MEDIA · RESEARCH · PUBLICATIONS

KERN IoP in the Media, Research and Technical Publications

A verifiable selection of independent media coverage, technical articles, scientific papers and books connected with PM Tec Engineering, KERN IoP and members of the team.

KERN IoP and PM Tec Engineering in specialist media

The following publications provide external references to KERN IoP, PM Tec Engineering, their projects or the technical work of team members. All cited sources are publicly accessible for verification.

PLASTICS ENGINEERING · SPE · 2024

Industry 4.0 in Injection Molding

Geoff Giordano’s article features KERN IoP and quotes Dr.-Ing. Miguel Garzón discussing data acquisition, OEE, energy, system integration and Industry 4.0 in injection moulding.

View publication →
PLASTICS ENGINEERING · SPE · 2024

Two Ways to Reduce Energy Consumption in Injection Molding

Laura Flórez documents a case in which KERN IoP is used to analyse the energy signature of an injection-moulding cycle and compare process conditions.

View publication →
TECNOLOGÍA DEL PLÁSTICO · 2026

i4Plas: Digital Transformation for the Plastics Industry

Tecnología del Plástico covered the launch of i4Plas by Acoplásticos, ICIPC and PM Tec Engineering, focusing on sensors, digital twins, simulation and artificial intelligence.

View source →
PORTAFOLIO · 2026

Launch of the i4Plas Centre for the Plastics Industry

Portafolio reported on the launch of the Centre for Digital Transformation in the Plastics Industry and its focus on technological modernisation and competitiveness.

View publication →
LA REPÚBLICA · 2026

Artificial Intelligence in Manufacturing

Daniel Mitchell’s column mentions i4Plas as an initiative to bring digital capabilities and artificial intelligence into practical manufacturing applications.

View publication →
METALMECÁNICA · 2022

Additive Manufacturing and Applied Expertise

Metalmecánica identified Dr.-Ing. Miguel Garzón as PM Tec Engineering’s manufacturing director and a contributor to the publication in coverage of the International Additive Manufacturing Seminar.

View publication →

Additional coverage of i4Plas is available in Envapack and other regional publications. For a technical explanation of the initiative, see our article i4Plas: Strengthening Digital Capabilities in the Plastics Industry.

Technical publications by the team

The team’s work combines applied engineering with specialist technical communication. Relevant recent publications include:

PLASTICS ENGINEERING · 2026

Digitalization to Improve Productivity

Laura Flórez discusses digital technologies for improving productivity, quality and decision-making in injection moulding.

Read →
PLASTICS ENGINEERING · 2026

Digitalization and Simulation: Redefining What Is Possible

A review of the integration of simulation, data and artificial intelligence to support decisions in plastics processing.

Read →
PLASTICS ENGINEERING · 2026

Digitalization Makes LCA More Accurate and Traceable

Laura Flórez discusses the role of digital infrastructure in traceability and life-cycle assessment.

Read →
PLASTICS ENGINEERING · 2025

Solving Jetting in Injection Molding

An article using shop-floor experience and images from PM Tec Engineering to explain how design and processing changes can address an injection-moulding defect.

Read →
METALMECÁNICA · 2015

The Actual Capabilities of Metal Additive Manufacturing

A technical article by Dr.-Ing. Miguel Garzón on SLS/SLM, productivity, quality, precision and industrial applications of metal additive manufacturing.

Read →
REPORTERO INDUSTRIAL · EDITORIAL EXPERIENCE

Technical Communication for Latin American Manufacturing

The team’s editorial background includes work published in Reportero Industrial, Metalmecánica Internacional, Tecnología del Plástico and international technical media.

View source →

Scientific publications and books

PM Tec Engineering’s technical foundations extend beyond plant-floor experience. Team members have undertaken academic research and published on polymer processing, advanced manufacturing, optimisation and manufacturing processes.

JOURNAL OF PHYSICS · 2018

Topology optimization applied to the design of cooling channels for plastic injection

D. A. Muñoz, J. P. Arango, C. González, E. Puerto and M. Garzón. DOI: 10.1088/1742-6596/1002/1/012004.

DOI →
LASERS IN MANUFACTURING · 2017

A Fluid-Dynamic Numerical Model for the Selective Laser Melting of High-Thickness Metallic Layers

F. Cordovilla, M. Garzón, D. A. Muñoz, J. Díaz, A. García-Beltrán and J. L. Ocaña. The publication lists Miguel Garzón’s affiliation as PM-Tec S.A.S.

UPM repository →
BOOK · 2013

Analysis of Discharge Forces on Sinking EDM with High Aspect Ratio Electrodes

Miguel L. Garzón. Apprimus Verlag, Aachen. ISBN 978-3-86359-141-0.

Publisher →
BOOK / DOCTORAL THESIS · 2011

Influence of the Foam Morphology on the Mechanical Properties of Structural Polymer Foams

Laura Fernanda Flórez Sastre. Verlag Mainz / IKV-Berichte, vol. 214. ISBN 978-3-86130-980-2.

RWTH Publications →
BOOK · 2010

Ciencia de Polímeros para Ingenieros

Tim A. Osswald, Georg Menges, Jairo Flórez and Laura Flórez. Editorial Guaduales. ISBN 978-958-98663-3-7.

PM Tec book record →
BOOK · 2015

Robust Design of Constrained Dynamical Systems

Diego Alejandro Muñoz Durango. Shaker Verlag, Aachen. ISBN 978-3-8440-3709-8.

PM Tec book record →
Scope: This selection prioritises verifiable publications relevant to the team’s engineering experience. Media coverage and authorship are documented as evidence of professional activity, not as certification or commercial endorsement of KERN IoP by the publishers.

Experience connected to industrial practice

Research, consulting, product development, training and technical publications form part of a common approach: understanding processes in sufficient depth to turn knowledge into engineering decisions. This approach underpins PM Tec Engineering and its Industry 4.0 division, KERN IoP.

Meet the technical profiles of Dr.-Ing. Miguel Garzón y Dr.-Ing. Laura Flórez, together with our analysis of industrial digitalisation in Colombia and Latin America and the work on i4Plas.

References

Selected sources

Cordovilla, F., Garzón, M., Muñoz, D. A., Díaz, J., García-Beltrán, A., & Ocaña, J. L. (2017). A fluid-dynamic numerical model for the selective laser melting of high-thickness metallic layers. Lasers in Manufacturing 2017. https://oa.upm.es/50015/

Florez, L. (2024, October 1). Two ways to reduce energy consumption in injection molding. Plastics Engineering. https://www.plasticsengineering.org/2024/10/two-ways-to-reduce-energy-consumption-in-injection-molding-006791/

Florez, L. (2026, March 27). Digitalization to improve productivity. Plastics Engineering. https://www.plasticsengineering.org/2026/03/digitalization-to-improve-productivity-010975/

Garzón, M. L. (2013). Analysis of discharge forces on sinking EDM with high aspect ratio electrodes. Apprimus Verlag.

Giordano, G. (2024, July 16). Industry 4.0 in injection molding. Plastics Engineering. https://www.plasticsengineering.org/2024/07/industry-4-0-in-injection-molding-005727/

Muñoz, D. A., Arango, J. P., González, C., Puerto, E., & Garzón, M. (2018). Topology optimization applied to the design of cooling channels for plastic injection. Journal of Physics: Conference Series, 1002, 012004. https://doi.org/10.1088/1742-6596/1002/1/012004

Portafolio. (2026). Industria plástica lanza el centro i4Plas para acelerar su modernización tecnológica. https://www.portafolio.co/negocios/industrias/industria-plastica-lanza-el-centro-i4plas-para-acelerar-su-modernizacion-tecnologica-503437

Collections of articles by the founding team

Browse technical articles, opinion pieces and scholarly work published by the founders in industrial media and professional associations. Each record includes a subject summary and the available source.

Laura Flórez’s articles →   ·   Miguel Garzón’s articles →