HARDWARE · PLANT-FLOOR DATA ACQUISITION

KERN IoP | SMARTHUB and SMARTPRO

Acquire signals from sensors and controllers together with information entered by personnel at the machine. Work orders, moulds, materials, downtime and production results can be linked to measured variables, depending on the project configuration.

Machine signal acquisition

Machine signals

Data entry at the machine

Operator records

Recording good parts

Production and quality

KERN IoP | SMARTPRO beside the control panel of an injection moulding machine.
KERN IoP | SMARTPRO beside an injection-moulding machine.

TWO COMPONENTS WORKING TOGETHER

SMARTHUB collects plant-floor signals. Operators add production records on SMARTPRO.

KERN IoP | SMARTHUB acquires signals from the installation. The KERN IoP | SMARTPRO touchscreen lets operators record production data at the machine. Connections, instrumentation and input forms are specified for each project.

01 · DATA ACQUISITION UNIT

Angled view of the KERN IoP | SMARTHUB showing its blue enclosure and front connections.

KERN IoP | SMARTHUB

It receives signals from sensors, meters, controllers and connected devices. Where required by the project, it can also integrate measurements from inspection equipment such as scales or machine-vision systems. These data are combined with touchscreen records before being transferred to the platform.

What this component does

Instrumentation may include energy, flow, temperature, pressure, PLC signals and measurements from testing or inspection equipment, depending on available inputs and interfaces. The SMARTHUB brings these records together with context supplied through the touchscreen.

Explore the data flow →

02 · OPERATOR INPUT

Front view of KERN IoP | SMARTPRO on a transparent background, displaying machine and production status
Interface shown in Spanish.

KERN IoP | SMARTPRO

Operators can enter orders, products, materials, moulds, cavities, quantities and downtime reasons using the forms and sensors included in the installation.

What this component does

Operating records provide context for interpreting automatic measurements. Operators can identify events and conditions that cannot be inferred from an electrical or machine signal alone.

Explore the data flow →

Explore the complete KERN IoP architecture →

DATA SOURCES

Three information sources integrated into one installation.

SMARTHUB integrates measured variables and available control-system data with records entered by operators on SMARTPRO. The precise combination is defined for each installation.

01

Industrial sensor connected to a data acquisition module, with a signal curve.

Sensors and signals

Acquires variables through instrumentation and inputs selected for the project. It can also integrate measurement and inspection equipment through suitable interfaces. Signal type, range, required resolution and installation conditions are evaluated.

02

Industrial control system connected to a processing machine.

Control systems

Connections to PLCs, controllers or machine interfaces depend on equipment specifications, available protocols and technical documentation. Compatibility is confirmed before proposing integration.

03

Operator entering information on an industrial screen beside a machine.

Operator records

The plant-floor interface adds information that a signal cannot identify by itself, such as orders, products, materials, downtime reasons, quantities or quality results, as configured.

KERN IoP | SMARTPRO · OPERATING RECORDS

A signal records when an event occurred. Plant personnel can help explain why.

Operators enter data on SMARTPRO at the machine to provide context for automatic measurements. In injection moulding, this may include orders, moulds, active cavities, operators, raw materials, downtime reasons and quality results, according to the project configuration.

Industrial sensor connected to a data acquisition module, with a signal curve.

The machine provides the records

Analogue or digital signals from sensors and controllers selected for the installation. Readout via industrial interfaces is evaluated against documentation and the equipment’s actual capabilities.

Operator entering information on an industrial screen beside a machine.

Operators provide context

Production personnel may document work orders, moulds, active cavities, materials, responsible operators, changes and downtime causes. Touchscreen and code-reading functions are included where specified.

Quality result showing a good part and a rejected part.

Output data completes the analysis

Good and rejected quantities can be related to the production period, product reference and available process conditions using either operator records or project-specific sensors.

This combination supports investigation of cycle, energy and quality differences. OEE requires suitable availability, performance and quality data, while detailed cycle-signature analysis requires instrumentation and temporal resolution appropriate to that task.

KERN IoP | SMARTPRO · TOUCHSCREEN INTERFACE

Operating information available at the machine.

The touchscreen enables production-status review, quality-result entry and display of integrated process variables. Available forms, signals and views are defined for each installation.

01 · PRODUCTION

KERN IoP SMARTPRO displaying operating status and order progress.
Interface shown in Spanish.

Production status and progress

Personnel can review machine status, product reference and order progress from their workstation.

02 · QUALITY

KERN IoP SMARTPRO with a form for reporting good and rejected parts.
Interface shown in Spanish.

In-process quality reporting

The operator can report good and rejected parts and relate the result to the order and production period.

03 · PROCESS

KERN IoP SMARTPRO displaying process pressure values and curves.
Interface shown in Spanish.

Process variables on the plant floor

Configured views allow personnel to review acquired signals and trends while operating the machine.

Fields, sensors and signals in each view are defined per installation.

PLANT-FLOOR DATA · APPLIED KNOWLEDGE

Information for decisions in production, quality and maintenance.

Operator records and equipment signals become useful when related to a specific engineering or operating question.

Quality result showing a good part and a rejected part.

Quality during the shift

Reporting good and rejected parts through the touchscreen.

Industrial sensor connected to a data acquisition module, with a signal curve.

Production losses

Signals and downtime reasons to distinguish stoppages from slow cycles.

Industrial machine connected to an interface and a data acquisition module.

Maintenance and reliability

Actual operating hours and events supporting maintenance diagnostics.

HARDWARE · INSTALLATION AND CONNECTIONS

Plant-floor installation and SMARTHUB connections.

Integrating SMARTHUB and the SMARTPRO touchscreen starts with a review of mounting points, available signals, power supply and the plant network. Mounting and connections are checked on the machine.

Example of mounting and wiring in an industrial machine's electrical cabinet.
KERN IoP integration in an industrial electrical cabinet.
Front view of the KERN IoP | SMARTHUB showing the display, terminal blocks, USB and Ethernet ports.
Front panel of the KERN IoP | SMARTHUB showing the display, terminal blocks, USB and Ethernet ports.

TECHNICAL DEFINITION

Configuration for a specific application.

Signals, recording frequency, data storage and required connections are specified according to the machine and application objective. KERN combines its own hardware and software with industrial components selected for each project.

To define the installation, we examine:

  • Machine brand, model and available documentation.
  • Variables, states and indicators to be recorded.
  • Existing sensors, signals and interfaces.
  • Power-supply, mounting and network conditions.
  • Information to be entered by plant personnel.

HARDWARE · FREQUENTLY ASKED QUESTIONS

What to specify before installing the hardware.

What data can SMARTHUB acquire?

SMARTHUB can acquire machine signals and sensor readings and integrate operator records entered on SMARTPRO. The exact variables depend on connectivity, instrumentation and the scope defined for each installation.

Can the hardware be installed on existing machines?

Yes, provided mounting points, power supply, network and available signals are properly defined. Integration is engineered for each machine and does not require replacing its control system.

What information can an operator record?

Depending on the configuration, operators can enter states, orders, produced quantities, quality results, downtime reasons and other operating data that add context to automatic signals.

Does SMARTHUB require a network connection?

Network requirements depend on the architecture. Transmitting data to remote services or KERN IoP | MONITOR requires agreed connectivity; network infrastructure is reviewed before installation.


PM Tec Engineering, through its Industry 4.0 division, KERN IoP.
Cota, Cundinamarca · Colombia.
© 2026 PM Tec Servicios de Ingeniería SAS · Website updated in 2026.

Privacy policy