INDUSTRY

Improve the performance of your injection-moulding processes.
We investigate cycle time, process stability, output, part quality and cell energy consumption using information from the injection-moulding machine, mould, auxiliary equipment and relevant production records.

Machine and process information.
KERN combines data acquisition with injection-moulding engineering to analyse energy consumption, cycles, stoppages, operating conditions and measured product characteristics. Material, mould and product-reference information provides the context needed to interpret these records.
What should be recorded.
01

Machine and auxiliary equipment
Identify each unit, its electrical supply and its role in the cell. Shared utilities are assessed separately to avoid unsupported allocation of energy consumption.
02

Cycle and production
Record cycle start and duration, product reference, active mould cavities and production quantities. One moulding cycle does not necessarily produce one part.
03

Operating conditions
Start-ups, setting changes, material or mould changes, pauses and downtime. These records help explain differences between production periods.
04

Part inspection results
Conforming output, scrap and measurements such as weight, dimensions or machine-vision results, when included in the project. Identifiers and manufacturing timestamps must be aligned before correlating them with process conditions.
RELATED CONTENT
Electrical energy measurement
Measuring the moulding machine and its auxiliaries.
Process engineering
Diagnostics, analysis and technical training.
Request a monitoring configuration for your plant.
Tell us which equipment you would like to monitor and what information you need to examine.
MODEL + MACHINE + CELL + QUALITY
A technical foundation for digital twins in injection moulding.
Injection moulding combines machine dynamics with heat transfer and rheological phenomena inside the mould, auxiliary-equipment conditions, polymer properties and part-quality outcomes. No single data source necessarily captures the complete system. An interconnected representation can combine engineering models with actual measurements to investigate the process state and its effect on the part.

- Model: filling, cooling and warpage simulation, heat balances or dynamic process models.
- Measurement: machine and cavity signals, mould-cooling water, energy, ambient conditions and auxiliary equipment.
- Context: mould, material, product reference, order, batch, cycle and operating state.
- Outcome: part weight, dimensions, automated inspection, scrap or another quality characteristic.
- Application: diagnostics, state estimation, prediction, comparison of scenarios or optimization within a validated operating domain.
A modern machine exposing OPC UA or EUROMAP data can simplify integration, while an older machine may require PLC interfaces, discrete signals, meters or additional sensors. Model usefulness depends more on measurement quality, production context and validation against the physical process than on the protocol name.
Technical references on injection moulding
Decisions about mould design, material and processing parameters benefit from an understanding of melt filling. In a 2025 SPE publication, Laura Flórez describes a case of correcting jetting with the involvement of PM Tec Engineering.
Read “Solving Jetting in Injection Molding” in Plastics Engineering ↗ · More publications by Laura Flórez →
Engineering
PM Tec Engineering, through its Industry 4.0 division, KERN IoP.
Cota, Cundinamarca · Colombia.
© 2026 PM Tec Servicios de Ingeniería SAS · Website updated in 2026.

You must be logged in to post a comment.