KERN IoP is PM Tec Engineering’s Industry 4.0 division. Its development draws on nearly 15 years of work alongside industrial companies in specialist consulting, technical training, process optimisation, product and tooling design, and applied research. This experience has shown us that digitalisation becomes valuable when data can be connected to the operational reality of each plant.
An industrial company may have sensors, meters, PLCs, control systems and extensive production records. Yet its engineers can still struggle to reconstruct a process deviation, explain unexpected consumption or compare two operating conditions.
The information often exists, but it remains scattered among machines, spreadsheets, manual records, enterprise systems and the accumulated knowledge of people working on the plant floor.
A measurement becomes genuinely useful when it can answer specific questions:
- What was the equipment doing at that moment?
- Which product, batch or production order was active?
- Was the process producing, waiting, heating up, being cleaned or undergoing a fault?
- What happened immediately before and after the observed change?
- Was the condition unusual, or had it occurred before?
This understanding of industrial information guides the ongoing development of KERN IoP: data-acquisition and contextualisation capabilities that can be applied across processes and manufacturing sectors.
An approach grounded in applied engineering
PM Tec Engineering has built its experience by working directly with the challenges that companies face on the plant floor.
Over the years, the company has provided process-optimisation consulting, manufacturing-capability assessments, product design and improvement, tooling development and analysis, manufacturing-technology selection, simulation, applied research and technical training.
It has also participated in projects involving additive manufacturing, thermal-system optimisation, robust design, multivariable control and Industry 4.0 technologies.
Combining engineering, research and direct involvement in production allows processes to be considered from several perspectives: product, material, machine, tooling, operations, quality, resource consumption and economic performance.
KERN IoP emerged in this environment as PM Tec Engineering’s division specialising in industrial sensing, data acquisition, analysis and management.
Its original purpose was to apply Industry 4.0 tools to practical manufacturing challenges: understanding current production status, identifying losses, relating process variables and providing useful information to those making operational decisions.
Initial development focused especially on plastics manufacturing and injection moulding. This setting enabled the development and validation of sensor and PLC acquisition, touchscreen-based operator records, machine-state identification, energy analysis and structured production information.
Injection moulding is a demanding application. Thermal, mechanical, electrical, hydraulic and operational conditions interact in every cycle. Even a small variation can affect cycle time, energy consumption, part quality, productivity or process stability.
Years of work in this environment helped establish capabilities that apply across many other industrial operations: knowing what to measure, at what frequency, under which conditions and which contextual information is needed to interpret each signal.
Industrial applications share common information needs
Industrial processes vary considerably. Furnaces, pumps, compressors, packaging lines, mixers and injection-moulding machines have different physical dynamics and production objectives.
Nevertheless, the questions asked by their engineers often follow a similar pattern:
- Why did consumption increase?
- What changed before the alarm?
- When did the deviation begin?
- How long did the process remain outside its expected operating condition?
- What differences occurred between two batches?
- How much time was spent producing and how much waiting?
- How did the variables behave during start-up?
Answering these questions requires more than viewing a trend chart.
A power reading of 42 kW tells us the instantaneous electrical demand of an asset. To interpret it, we also need to know whether the equipment was producing, heating, stopped, waiting for material or running without a load.
A temperature of 180 °C may be appropriate during one process stage and a critical deviation during another.
Reduced flow may indicate a normal transition, a blockage, a configuration change or a fault.
Context helps distinguish between these situations.

Variables, states and events
The KERN IoP architecture organises industrial information around three complementary components:
| Component | Function | Examples |
|---|---|---|
| Process variables | Describe the asset’s physical or energy-related behaviour | Temperature, pressure, flow, level, energy, power, vibration, speed and electrical signals |
| Operating states | Describe a condition that persists over a period | Production, waiting, heating, cooling, cleaning, maintenance, fault or shutdown |
| Events | Identify occurrences at a specific point in time | Start, stop, alarm, batch change, recipe change or parameter adjustment |
Combining these three layers allows the plant to review both the evolution of signals over time and the operating conditions associated with their behaviour.
For example, increased energy consumption can be examined alongside equipment state, the active product and events recorded during the same interval. The result is a more complete representation of operations than a series of isolated values.
Operator knowledge is also part of the information
Relevant information is not always available automatically from a PLC or sensor.
The people operating and maintaining equipment know the reasons for downtime, adjustments, interventions and circumstances that are difficult to infer from a machine signal alone.
States and events can therefore be recorded in different ways:
| Method | Description | Typical application |
|---|---|---|
| Manual | An operator selects a state or reason through an interface | Cleaning, product changeover, waiting for material or maintenance |
| Automatic | The system identifies a condition from signals and predefined rules | Production, shutdown, heating or operation under load |
| Hybrid | The system detects a condition and asks an operator to confirm the cause | Classification of downtime, alarms and deviations |
The hybrid method combines the consistency of automatic acquisition with the knowledge of the people running the process.
This integration has been central to KERN IoP’s experience in plants. Analysis quality depends on sensor accuracy and on recording what the control system cannot explain on its own.
Connecting engineering experience with data is a foundation of Industry 4.0. For an explanation of how this relates to physics-based models, simulation, digital twins and advanced control, see our guide What is Industry 4.0, and how can it help people make better decisions on the plant floor?.
Digitalisation and productivity in Latin America
Making better use of industrial data is particularly important in Latin America.
The region continues to face low growth and limited productivity gains. The Economic Commission for Latin America and the Caribbean (ECLAC) has described a period of moderate growth, with rates close to 2% annually, while labour productivity has advanced only slowly over several decades (ECLAC, 2024; ECLAC, 2025).
Manufacturing also faces challenges. According to UNIDO, its share of regional GDP declined from 17.4% in 2000 to 13.2% in 2024. In 2024, Latin America and the Caribbean accounted for approximately 5% of global manufacturing value added (UNIDO, 2025).
These figures highlight the importance of helping companies produce more efficiently, make better use of their assets, retain technical expertise and adopt technology consistently.
Digital transformation can contribute through better use of data, improved operational visibility and a greater ability to identify losses and deviations. Its impact depends on addressing specific manufacturing problems.
The Inter-American Development Bank has also reported that many MSMEs in Latin America and the Caribbean remain at early stages of digital maturity, particularly in data and analytics (IDB, 2023).
On the plant floor, this often appears in practical ways:
- sensors are installed, but their readings remain isolated;
- PLCs hold information that is not retained in historical records;
- energy consumption is available only as an aggregate;
- downtime reasons depend on incomplete manual records;
- quality results are not synchronised with process conditions;
- analysis requires consolidating several spreadsheets.
For many companies, the first priority is a reliable foundation of operational information that can support more advanced analytical or automation applications.
Start digitalisation with a clear question
Industrial projects work best when they address a specific need.
A company may want to distinguish energy used for production from energy used while waiting, examine the temperature profile of a furnace for each batch or understand what happened before a pressure drop.
It may also need to compare several start-ups, measure downtime or establish how long a process variable stays within a defined operating band.
A clear question makes it possible to:
- select the necessary variables;
- define an appropriate acquisition frequency;
- configure operating states;
- specify which events should be recorded;
- determine which comparisons will be useful.
This approach allows a project to begin with one asset and a small number of signals. The scope can be extended once data quality and the usefulness of the information have been established.
For Latin American manufacturers, a gradual implementation reduces exposure to large architectures whose practical value has yet to be demonstrated. It also gives internal teams time to develop capabilities and adopt new ways of working.
Capabilities that apply across industries
The KERN IoP architecture can serve different industrial processes while retaining the same underlying approach to acquisition and contextualisation.
| Industry or process | Information that can be contextualised | Applications |
|---|---|---|
| Thermal processes | Temperature, energy, heating and cooling ramps, time within a specified band, batch and alarms | Furnaces, dryers, autoclaves and heat treatment |
| Pumping and water treatment | Pressure, flow, level, power and pump status | Pumping stations, fluid networks and treatment plants |
| Compressed air and industrial utilities | Power, pressure, loading and unloading, and operation outside working hours | Compressors and utility networks |
| Batch processes | Recipe, stages, temperature, agitation, processing time and consumption | Mixers, reactors, vessels and formulations |
| Industrial refrigeration | Temperatures, pressures, energy consumption, operating states and alarms | Cold rooms and refrigeration systems |
| Discrete manufacturing | Cycles, operating states, downtime, consumption and machine signals | Presses, machining, assembly and packaging |
| Plastics processing | Cycle, energy, material, mould, machine variables and quality | Injection moulding, extrusion, blow moulding and auxiliary operations |
In each application, the customer’s own specialists remain central. They understand the operating limits, physical relationships and decisions specific to their process.
KERN IoP provides the infrastructure that helps make this expertise actionable through organised, traceable and accessible data.
Engineering experience ties the elements together
Expanding KERN IoP to other industrial processes is closely connected with PM Tec Engineering’s experience.
| PM Tec Engineering experience | Contribution to KERN IoP development |
|---|---|
| Process consulting and optimisation | Identifying critical variables, losses and improvement opportunities |
| Product design and improvement | Understanding the relationship between design, manufacturing, quality and cost |
| Tooling development and diagnostics | Joint analysis of machine, tool, material and operations |
| Technical training | Presenting information that engineers, technicians and operators can understand |
| Simulation and applied research | Developing hypotheses, validating relationships and analysing complex phenomena |
| On-site engineering support | Understanding actual installation, operation and maintenance constraints |
Consulting has revealed the problems that arise when product, material, machine and operating conditions are poorly aligned.
Design consulting has shown how decisions made during product development subsequently affect manufacturability, quality and cost.
Optimisation projects show that improvements can be sustained when critical variables are identified and kept under control.
Training confirms that technology delivers greater value when people understand the information and can turn it into action.
Applied research provides methods for studying complex phenomena, testing hypotheses and developing original engineering solutions.
KERN IoP brings this experience together in a platform for acquiring and contextualising industrial information.
Technological capability comes from more than developing hardware or software. It is also built by working for years alongside engineers, operators, quality managers, maintenance teams, designers and company leaders on practical process challenges.
Making data available to the people making decisions
The aim of this development is to put reliable information in the hands of production, maintenance, energy, quality and plant engineers.
The system can combine sensors, meters, PLCs, digital inputs and records entered by operators. Information can be viewed as time series, linked to operating states and organised around events.
This enables users to:
- analyse trends;
- compare periods, batches or start-ups;
- review consumption by operating state;
- reconstruct events;
- identify time spent inside or outside limits;
- export information;
- perform their own analyses;
- connect data to other tools.
The platform provides the technical infrastructure; the customer’s teams contribute interpretation and knowledge of their specific processes.
This division of responsibilities allows the solution to serve different industries without requiring entirely bespoke analysis software for each installation.
A practical approach to digital transformation
Productive digitalisation needs a direct link to operating conditions.
A platform provides value when it helps answer questions that previously required hours of searching, incomplete records or explanations based on memory alone.
PM Tec Engineering’s experience has shown that analysis quality depends as much on how variables, states and events are defined as on the technology used.
After nearly 15 years working alongside manufacturers, one lesson stands out:
More measurements do not automatically lead to better understanding. What matters is choosing the right variables and relating them to the actual operating state.
As PM Tec Engineering’s Industry 4.0 division, KERN IoP puts this approach into practice by providing industrial sensing, acquisition and contextualisation capabilities across different manufacturing processes.
Reference sources
Banco Interamericano de Desarrollo. (2023). Radiografía de la transformación digital en las firmas de América Latina y el Caribe.
Comisión Económica para América Latina y el Caribe. (2024). Estudio Económico de América Latina y el Caribe 2024.
Comisión Económica para América Latina y el Caribe. (2025). Transformación digital productiva: análisis de políticas, estrategias e instrumentos para impulsarla en América Latina.
Organización de las Naciones Unidas para el Desarrollo Industrial. (2025). International Yearbook of Industrial Statistics 2025: Latin America and the Caribbean.

Leave a Reply